Filter Results By:
Products
Applications
Manufacturers
-
product
Combined Illumincance and Irradiance Probe
LP471P-A
Combined probe for measuring ILLUMINANCE (lux), with standard photopic response, and IRRADIANCE (μW/cm²) in the UVA spectral range (315…400 nm, with peak at 360 nm).
-
product
Dual Band Radiometer
UVS-AB-T
The UVS-AB-T measures UV-A irradiance and UV-B irradiance.The dual band UVS-AB-T measures the irradiance in two spectral bands with a single sensor providing separate outputs for each band
-
product
Handheld UV Meter
The hand-held Hönle UV-Meter measures exact data that is traceable to the German standard PTB (Physikalisch Technische Bundesanstalt). Different sensors cover wavelengths from 230 nm to 550 nm – UVC, UVB, UVA and VIS.
-
product
Irradiance Probe
LPUVA01
The LPUVA01 probe measures irradiance (W/m2) defined as the ratio between the radiant flux (W) passing through a surface and the surface area (m2) in the UVA (315 nm … 400 nm) spectral range.
-
product
Light Meter
Ideal for measuring mercury, xenon, metal halide or fluorescent lamps, commonly used for studies in the UVA region, as well as sunlight.
-
product
Photometric Radiometric Transmitters
HD2021T Series
The serie HD2021T allows to convert photometric and radiometric quantities, such as illuminance (Lux) and irradiance (W/m²) in the UVA, UVB, UVC spectral regions and in the 400 … 1050nm band, into a 0 …10Vdc voltage signal. The series is suitable to be installed either indoor and outdoor.
-
product
Portable Luxmeter
HD2102.1
Portable handheld luxmeter for measuring illuminance, luminance, PAR, irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or measurement of irradiance effective according to the UV action curve).
-
product
Radiometer
X1-1-RCH-116-4
The X1-1 radiometer from Gigahertz-Optik features an RCH-116-4 detector and is ideal for measurement of the irradiance of high power LEDs in the UV-A and blue light range. The device can accurately measure irradiance levels of up to 40,000 mW/cm². One of the outstanding features of the RCH-116-4 detector is its proven concept of a passive radiation absorber coupled to a UV sensor. This provides stability even in high temperature and intense UV radiation environments. In addition to the passive radiation absorber, the device also has a cosine-corrected field of view. The sensor’s housing also serves as a handle. The battery-powered X1-1 optometer supports a usable dynamic range from less than 1 mW/cm² to 40,000 mW/cm² thanks to its high-end signal amplifier. It can be used to perform precise measurements of up to 5 standard LED wavelengths for which the detector was calibrated for active irradiance. In addition to the CW measurement function, the device also has a dose measurement function. The radiometer can be used with other detectors from the RCH series. e.g. for gas discharge lamps. Remote control of the device is possible via its user software and a software development kit is offered for integration of the device in the user’s own software.
-
product
Radiometer/Photometer Kit
AccuMAX™ Series
Single detector with dual sensors measures both ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI. Specially engineered for NDT applications. The AccuMAX XRP-3000 radiometer/photometer kit uses a dualwavelength UV-A/VIS sensor detector to measure both ultraviolet and visible light. Featuring automatic zeroing, integration and signal hold, the unit provides accurate readouts for UV, visible irradiance or radiance.
-
product
Radiometer Spectral sensitivities precisely adapted to the measurement task
UVS-B-T
Compared to the spectral response of the UVS-E, the UVS-B-T has a sharper cut-off at the transition from UV-B to UV-A. This feature reduces the UV-A contribution to the radiometer output and permits the highest possible correlation to atmospheric UV-B irradiance.
-
product
Radiometric Probe for Irradiance
LPUVA02
Amplified radiometric probe for outdoor use for measuring IRRADIANCE in the UVA spectral range (315...400 nm).
-
product
Radiometric Probe for UVA Irradiance
LPUVA03…Series
The LPUVA03 probe measures irradiance (W/m²) defined as the ratio between the radiant flux (W) passing through a surface and the surface area (m²) in the UVA (315 nm…400 nm) spectral range. Thanks to a new type of photodiode, LPUVA03 is blind to visible and infrared light.
-
product
SiC UV photodiodes
active areas from 0.06 mm² to 36 mm² and quadrant photodiodes for position determinationUV broadband sensitivity or with optional filters for UVA, UVB, UVC or UV indexdifferent entrance windows and housing designsown SiC chip production since 2009PTB-published high radiation hardnessPhotodiodes catalog
-
product
SiC UV-TOCONs
SiC-basierter UV-Sensor mit 0 – 5V SpannungsausgangIntensitäten von 1,8 pW/cm² bis 18 W/cm² messbarUV-Breitband-Empfindlichkeit oder mit Filtern wahlweise für UVA, UVB, UVC oder UV-IndexGaP-Chip-Serie für BlaulichtmessungSi-Chip-Serie zur Messung sichtbarer Strahlungverschiedene Eintrittsfensterlieferbar im TO5-Gehäuse oder als Miniatur-Mess-Sonde (Edelstahl oder Kunststoff)TOCON-Katalog
-
product
UV A Radiometer
UVS-A-T
The UVS-A-T has a broad spectral response optimised for precise measurements of atmospheric UV-A irradiance.
-
product
UV-A Sensor
GUVV-T20GD-U
Indium Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVA-S12SD
Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationGood Visible BlindnessHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVV-S10SD
Indium Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVA-C22SD
Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationGood Visible BlindnessHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVA-T11GD-L
Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationGood Visible BlindnessHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVV-T10GD
Indium Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationHigh Responsivity & Low Dark Current
-
product
UV-A Sensor
GUVA-T11GD
Gallium Nitride Based MaterialSchottky-type PhotodiodePhotovoltaic Mode OperationGood Visible BlindnessHigh Responsivity & Low Dark Current
-
product
UV Radiation Detector
*UV Index measurement from 0-20 (0.5 increment) UVA and UVB*4 digits*Alarm clock : 30 second alarm sound*Alarm chime enable / disable*Clock function : Month, Date, Hour, Minute, Second*Hour format : 12/ 24 selectable*4 years calendar*LC display test
-
product
UV Radiometer
DM-365XA
Measures UV-A light sources with overall accuracy of 5% per NIST standards
-
product
UV Transmittance Analyzer
UV-2000S/F
One touch sample analysis, with results in less than five seconds (per location, per slide)Manual translation stage for accurate sample positioning, pre-and post-irradiationEasy-to-use, menu-driven application softwareSimple instrument performance validation routine ensures accurate, repeatable measurementsUV-2000S: Automatic calculation of SPF, UVA to UVB ratio, critical wavelength, 2007 COLIPA UVA-PF method, 2008 Boots Star Rating and proposed 2009 FDA UVA:UVB ratio methodUV-2000F: Automatic calculation of UPF parameters per AS/NZS 4399:1996, EN 13758-1:2002, AATCC 183:2004, GB/T18830:2009, Japan Garment association standard and user defined methods
-
product
Wireless UV & White light Meter
Apollo 1.0
Labino’s Apollo 1.0 Radiometer/Photometer is an instrument for ACCURATE measurement of UV-A irradiation and visible illumination. Extra engineering effort is taken to make an accurate measurement of visible light emission from a UV-A lamp by incorporating a su-perior band pass filter stack containing only non-fluorescent filters. The instrument pro-vides fast measurement as it offers auto ranging and concurrent measuring of visible light and UV-A irradiation. Apollo 1.0 is traceable to NIST (USA’s National Institute of Standards and Technology). - See more at: http://labino.com/portfolio_item/labino-uv-meter/#sthash.yzHXJamq.dpuf
-
product
Solar Simulators (310 - 800 Nm)
Luzchem Solar Simulators are intended for Solar matching of the UVA and Visible spectrum. Luzchem offers 2 solar simulator products. 1. SolSim2 is a manual photoreactor with excellent solar matching above 320 nm, it features an ozone-free lamp which eliminates the need to exhaust to a fumehood.2. CCP-SolSim is a computer controlled photoreactor which matches the solar spectrum in the UVA and visible regions.
-
product
Organics Analyzer
Model 6700U
Teledyne Analytical Instruments
Teledyne’s 6700U leverages ultraviolet absorption (UVA) detection to measure for certain dissolved organic substances in water treatment and wastewater applications. Absorption of UV light at the 254 nm band is an indication of the presence of disinfection byproducts (DBPs), tri-halo methanes (TTHM) and halo-acetic acids (HAA). The 6700U provides an on-line measurement without reagents and utility gases required.
-
product
UVA Logger Sensor
NUL-232
There are different wavelengths of ultra violet light.The UVA wavelength range is 320-370 nm, which is 98% of the total UV radiation.The UVA radiation affects photoaging and also photochemical smog.The intensity of this light is measured in mW/m2 (milliwatt per square meter).
-
product
SparkFun UV Light Sensor Breakout
VEML6075 (Qwiic)
The VEML6075 UV Light Sensor Breakout is SparkFun’s latest ultraviolet sensing solution. The VEML6075 implements a simple photodiode to measure the levels of UVA (320-400nm) and UVB (280-320nm) radiation. With this breakout, you will be able to read the intensity of these types of light in irradiance, and from there, calculate the UV Index. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
