Filter Results By:
Products
Applications
Manufacturers
Spectroscopy
The use of the absorption, emission, or scattering of electromagnetic radiation by atoms or molecules (or atomic or molecular ions) to qualitatively or quantitatively study the atoms or molecules, or to study physical processes. Virginia Tech
See Also: Dissolved Gas, Terahertz
-
product
CellTest Multichannel Potentiostat
Simultaneous Electrochemical Impedance Spectroscopy (EIS) tests can be run on multiple cells by connecting Solartron 1455A/1451A series frequency response analyzer (FRA) modules to the 1470E. These FRAs can operate in single sine correlation or multi-sine / Fast Fourier Transform (FFT) analysis mode, providing the ultimate in speed, precision and accuracy. The 1455A FRA provides high performance impedance measurements over the frequency range 10 μHz to 1 MHz, while the 1451A FRA operates from 10 μHz to 100 kHz.
-
product
Compact Gamma Ray Detector
EV-CPG
The EV-CPG compact gamma ray detector is perfect for a wide range of nuclear spectroscopy needs. This compact gamma detector is ideal for applications requiring high efficiency, high resolution, and room temperature operation. The compact size and rugged design allow for use in harsh or restrictive environments. Available in standard sizes of 10x10x10mm3 and 10x10x7.5mm3. Other sizes available in limited quantities.
-
product
CRDS Gas Analyzers
Based on absorption spectroscopy, our Tiger Optics Cavity Ring-Down Spectroscopy (CRDS) works by attuning light rays to the unique molecular fingerprint of the sample species. By measuring the time, it takes the light to fade or “ring-down”, you receive an accurate molecular count in milliseconds.
-
product
CZT-based Radiation Detector
SPEAR
A CZT-based gamma radiation and x-ray detector perfect for immediate use (using Kromek KSpect or MSpect gamma spectroscopy software) or as the gamma radiation and x-ray detector component in your own radiation detector. Being CZT-based the SPEAR (Single Point Extended Area Radiation) can operate at room temperature while still offering high sensitivity. The SPEAR detector is a complete probe, comprising a 5x5x5mm3 CZT detector crystal and low noise hybrid preamplifier in a housing measuring only 13mm diameter x 84mm in length. The probe is supplied complete with a 2 metre long connecting input/output cable, allowing the unit to be used immediately.
-
product
Digital Pulse Processor For X-Ray Spectroscopy
Dante
The Digital Pulse Processor for X-Ray Spectroscopy
-
product
EIS Interface (Electrochemical Impedance Spectroscopy)
BATT470m
The BATT470m electrochemical impedance analysis interface (EIS) provides an easy to use battery/cell impedance test platform for the electrochemical industry. Utilizing the highly accurate PSM3750 frequency response analyzer from N4L, the BATT470 provides impedance measurement of batteries/cells up to 100V DC. With a frequency range of 100mHz to 1MHz, the BATT470m covers a wide range of applications. Our software package - PSMComm2, featuring “EIS” mode, displays the in-phase and quadrature impedance of the cell in Nyquist form as well as overall impedance (Z), in bode form.
-
product
Electrochemistry Research Equipment
Our electrochemical equipment will help your group achieve laboratory and research goals. The best-selling EZstat Pro potentiostat/galvanostat can run cyclic voltammetry, electrochemical impedance spectroscopy (EIS), battery tests, and high speed galvanostatic intermittent titration technique (GITT). The EZstat HV potentiostat delivers up to 1 amp at 25 volts. The Powerstat comes in two configurations (5 amp vs 20 amp). The Duostat bipotentiostat can operate rotating ring-disk electrode experiments. The Arraystat and ArrayPGstat feature multichannel operation with different customizable options (current range, number of channels, etc.).
-
product
Electron Spectrometers
SPECS Surface Nano Analysis GmbH
Nanotechnology is focused on the engineering and the physical properties of small structures. Therefore techniques that have sensitivities at a scale of 0.1 nm to 100 nm are required to study these structures. Different methods of electron spectroscopy (XPS, UPS and AES) have a sensitivity in this range and are therefore key techniques in nanoscience.Thanks to our high level of expertise in electron optics and electronics we can offer electron spectrometers with the highest resolution and transmission possible.
-
product
Enable Non-Invasive Analysis
Sparklike Handheld™
Sparklike Handheld™ is practical and quick method to test IG gas concentration. Technology is based on plasma emission spectroscopy. A high voltage spark is launched in the IG unit's cavity causing a light emission which is observed and analyzed further.
-
product
Femtosecond Terahertz Spectrometer
Pacifica
Terahertz spectroscopy and microscopy are becoming a powerful tool in biology, medicine, semiconductor physics and in many applicaitons. Designed for obtaining THz spectra by using of THz pulses generated by femtosecond laser in oriented ZnTe crystal.
-
-
product
FTIR
The preferred method of infrared spectroscopy. When IR radiation is passed through a sample, some radiation is absorbed by the sample and some passes through (is transmitted).
-
product
FTIR – Fourier Transform Infrared
FTIR stands for Fourier Transform Infrared spectroscopy. It is a powerful gas measurement technology for simultaneous measurements of multiple gases. The ability to detect and measure almost any gas, combined with the robustness and reliability of the technology, makes FTIR ideal for a wide variety of applications.
-
product
FTIR Gas Analyzers
FTIR Spectroscopy gas analyzer instruments from MKS Instruments are capable of ppb to ppm sensitivity for multiple gas species in a variety of gas analysis applications, such as toxic gas detection, automotive emissions measurement, and monitoring stack emissions, processes, ambient air, purity, and selective catalytic reduction performance.
-
-
-
-
product
FT-NIR Spectrometers
FT-NIR spectroscopy for quality control applications in all industries, including the pharmaceutical, food, agricultural and chemical sector. FT-NIR is ideal for rapid raw material identification and is also a powerful analysis tool capable of accurate multi-component quantitative analysis.
-
product
Gratings and Turrets Family
Teledyne Princeton Instruments
Multiple options for spectroscopy
-
product
High-Performance, Low-Noise CCD and X-Ray Cameras
PIXIS Family
Teledyne Princeton Instruments
PIXIS cameras are fully integrated, low-noise cameras with deep cooling for quantitative scientific imaging and spectroscopy from UV-NIR. High-quantum efficiency and ultra-low-noise electronics make PIXIS cameras ideal for demanding low-light applications.
-
product
High Performance Raman Spectrometer
Combining volume phase holographic (VPH) grating, wavelength optimized optics and deep-cooled CCD camera, Zolix is proud to present stateof-the-art Omni-iSpecT Raman spectrograph. It solves two essential problems concerned with Raman spectroscopy, speed and sensitivity. VPH spectrograph allows you to have faster acquisition and better S/N ratio, it is ideal for low light Raman applications such as remote detection, ultra fast Raman mapping etc, its lens-based design delivers minimum distortion at focal plane and ensures best image quality, which gives you high resolution and large spectral range simultaneously, also perfect image quality is ideal for multi-channel applications without cross-talking. The Omni-iSpecT's rugged and compact design make an ideal module for in-the-field and industrial applications; It is still suitable for academic research with research-grade performance; The Omni-iSpecT also provides the SDK file for secondary development.
-
product
High-Resolution Double and Triple Spectrometers
TriVista
Teledyne Princeton Instruments
TriVista spectrometers are 2-stage or 3 stage spectrographs designed for demanding spectroscopy applications in material science, chemistry and life science. It is the most versatile and customizable spectroscopy platform for Raman, photoluminescence, resonance Raman and fluorescence.
-
product
High-Speed Cameras for Spectroscopy
BLAZE®
Teledyne Princeton Instruments
The BLAZE® is the ideal camera for low-light spectroscopy detection, delivering extremely high sensitivity over the visible and NIR range. With low dark current and fast speed, the BLAZE offers a QE above 90% at 450 nm, 98% at 900 nm and 75% at 1000 nm
-
product
High Throughput Optical Streak Camera
AXIS-NV
AXIS-NV is used for time-resolved spectroscopy of subnanosecond eventsin the visible and IR range.
-
product
Hyperspectral Cameras
HySpex
HySpex, NEO's line of hyperspectral cameras, are well-proven, robust, compact, high performance and versatile instruments for a multitude of applications, ranging from airborne to laboratory, field and industrial use of imaging spectroscopy.
-
product
Imaging X-Ray Photoelectron Spectrometer
AXIS Supra+
X-ray photoelectron spectroscopy (XPS) is unique in providing quantitative elemental and chemical state information from the uppermost 10 nm of a materials surface. The AXIS Supra+ (also known as Kratos Ultra 2+ in Japan) is a market leading X-ray photoelectron spectrometer combining state-of-the-art spectroscopic and imaging capabilities with the highest level of automation currently available. Unrivalled large area spectroscopic performance allows photoelectron spectra to be acquired from all types of materials including metals, semi-conductors and insulators. Fast, high spatial resolution XPS imaging reveals the lateral distribution of surface chemistry and aids further characterisation with selected small area analysis.
-
product
Imaging X-Ray Photoelectron Spectrometer
Kratos AXIS Nova
X-ray photoelectron spectroscopy (XPS), also known as electron spectroscopy for chemical analysis (ESCA), is a mature and widely used surface analysis technique for materials characterisation. XPS provides quantitative elemental and chemical state information from the upper most 10 nm of material. The The AXIS Nova photoelectron spectrometer can collect X-ray photoelectron spectra and images from any material that is stable under the ultra-high vacuum conditions required for the technique.
-
product
Impedance Spectroscopy
NuVant EZware-EIS Software Package
The NuVant EZware-EIS software package activates Electrochemical Impedance Spectroscopy on the EZstat-Pro, Powerstat-05 and -20 potentiostat/galvanostats. EZware-EIS exports the impedance data to a file format to accommodate free third party EIS analysis software. EZware-EIS is a user-friendly interface that allows selection of the proper scanning parameters, collect the impedance spectra, display data in Nyquist and/or Bode plots and export data in the proper data format for use in EIS analysis software.
-
product
Inductively Coupled Plasma Emission Spectroscopy
Inductively Coupled Plasma Emission Spectroscopy
-
product
Inductively Coupled Plasma Spectroscopy (ICP-OES/MS), ICP Analysis Services
ICP-OES measures the light emitted at element-specific characteristic wavelengths from thermally excited analyte ions . This light emitted is separated and measured in a spectrometer, yielding an intensity measurement that can be converted to an elemental concentration by comparison with calibration standards. ICP-MS (ICP-Mass Spec) measures the masses of the element ions generated by the high temperature argon plasma. The ions created in the plasma are separated by their mass to charge ratios, enabling the identifcation and quantitation of unknown materials. ICP-MS offers extremely high sensitivity (i.e. low detection limits) for a wide range of elements
