Filter Results By:
Products
Applications
Manufacturers
Environment Chambers
simulate surrounding conditions test target will be exposed to in application.
-
product
Chamber Light
LED-CL
The Teledyne Bowtech LED-CL Chamber Light is extremely safe and reliable, due to its advanced technology and innovation.The light has 100,000 hour life and has been designed specifically for use within the Hyperbaric Diving environment, whether that is in Hyperbaric Chambers, TUP's, Diving Bells or even Wet Bells.
-
product
Cytogenetic Drying Chamber
CDS-5
Developed in cooperation with Mayo Clinic, Thermotron's Cytogenetic Drying Chamberthe CDS-5was specifically designed for conducting cytogenetic slide drying tests during harvest of in situ and non-in situ grown cultures. The CDS-5 provides the optimum controlled temperature and humidity environment required to achieve ideal chromosome spreading results. As evidenced in research conducted by the Cytogenetics Laboratory at Mayo Clinic, the CDS-5 facilitates reliable and repeatable chromosome spreading. The use of an environmentally controlled drying chamber is a practical and cost effective way of achieving ideal chromosome spreading in a routine and highly consistent manner. Favorable chromosome spreading results can be obtained for both in situ and non-in situ cultures including PHA stimulated lymphocytes, bone marrow, amniocytes, and fibroblast.
-
product
Drying Ovens
Dongguan Amade Instruments Technology Co., Ltd
Drying oven is divided into fan blown type electric drying oven and vacuum drying oven based on the different materials which are dried. Electric drying oven is an oven with circulating air function to dry materials containing water by the way of electrical heating. Vacuum drying oven is a instrument provides vacuum environment for specially heat dry heat-sensitive, easily decomposed and easily oxidized materials. Working chamber is vacuumed by vacuum pump prior to drying, allowing to be filled with inert gas If necessary. Drying cabinets are widely used in chemical industry, electronic communication, plastics, cables, hardware, automobile parts, rubbers, printing, medical products, academy laboratories etc.
-
product
Reverberation Tent
This product is a chamber made of metal flexible fabric tent assembled as a cavity that provides a periodic electro-magnetic environment randomly polarized, spatially uniform, and isotropic.
-
product
RF Diagnostic Chamber
DST200
The R&S®DST200 RF diagnostic chamber is the ideal environment for RF analysis during development. It supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used at all times during the product design and optimization phase. The R&S®DST200 effectively assists in achieving high first-time pass rates during final type approval, which saves time and money.
-
product
Sound and Light Controlled Environment
SmartChamber
SmartChamber provides a sound isolated, ventilated and light controlled environment to perform high performance ultrasonic vocalization experiments. The chamber can be provided with a built-in Sonotrack ultrasonic microphone and has an interior which effectively removes sound echo's, external noise and sounds and magnetic fields. SmartChamber can be seamlessly integrated with our product Sonotrack
-
product
Temperature Chambers
SU Series
The SU series temperature chambers can be placed underneath a benchtop, as well as on top. The smaller models run on standard 115V power, enabling easy installation anywhere. Extremely quiet operation of just 55 dba is suitable for quiet lab or office environments.
-
product
Vacuum Process And Chamber Environment Monitors
Our process monitors are innovative in-situ process monitoring instruments that are fully integrated, application-specific packages, including component residual gas analyzers (RGAs), analytical equipment, and control software. Process mass spectrometers are used in varied applications, including; Semiconductor, Thin Film (CVD, Etch, PVD and degas), pharmaceutical lyophylization and bulk gas purity monitoring.
-
product
Vacuum Slip Rings
Vacuum Slip Rings are especially suitable for a space environment on satellite platforms or payloads but can also be used in vacuum chambers of large ground-based scientific instruments such as synchrotrons or telescopes.
-
product
Vivarium Rooms
Darwin Chambers Company ALAAC, OLAW, USDA, and NIH-compliant Vivarium Rooms are designed for maximum value, sustainability, and conformance with applicable standards. We have over a decade of experience in working with researchers to provide humane and often precise conditions to meet their unique and specific needs. Vivariums are commonly defined as a place, such as a in laboratory, where live animals and/or plants are kept under conditions simulating a natural environment. Often, these contain both plants and animals, within a micro-ecosystem, often with controlled stability or controlled change of environmental variables. We offer various surface finishes, including all stainless steel, which are easy to maintain and may be sterilized to cleanroom standards. Compartmentalized enlosures are offered, which are modular and reconfigurable. Our rooms will accommodate plants as needed (we also provide plant growth chambers), and we offer control of humidification in conformance with current ALAAC mandates, sufficient air exchanges, available HEPA filtration of intake and/or exhaust air, standard screened equipment hous- ings, and other such considerations.
-
product
Walk in Chamber for Sand Dust-proof Test
Guangdong Bell Experiment Equipment Co.,Ltd
DGBELL Walk in dust-proof test chamber provide a simulated sand blowing and dusting environment. It can continuous operation for a long time without failure.
-
product
Temperature And Humidity Chambers
Dongguan Amade Instruments Technology Co., Ltd
Temperature and humidity chamber is also referred to as climatic chamber, programmable temperature humidity chamber, constant environmental test chamber, constant humidity chamber, temperature and humidity controlled cabinet etc. It Is capable of simulating the range of temperature & humidity fluctuating from an extremely low value of -70℃ & 20% R.H to an exceeding high value 150℃ & 98% R.H which products may be exposed to in the natural environment. Constant temperature&humidity testing machine can be used to measure the resistance of specimens to withstanding extremely high temperature, low temperature, constant temperature, high humidity, low humidity or various programmed combinations. Applied to all materials and product which are sensitive to temperature and humidity, such as electronics, appliances, cell phones, communications, instruments, vehicles, plastics, metals, foods, chemical products, construction materials, medical products, aerospace components etc.
-
product
Fibre Optic Converters
In complex testing environments it is often needed that electrical signals have to be transmitted into the chamber or out of the chamber to the test equipment.For that purpose we offer a variety of different interfaces that convert electrical signals into optical signals and back. Such the signal can be transported via fibre optics and is immune against electrical fields.
-
product
Acoustic Control System
m+p VibControl performs acoustic testing in reverberation chambers and direct field environments as well as progressive wave tube testing. It is a fully automatic digital control system, providing fast, accurate and repeatable control of high-level noise to a reference octave band spectrum and the overall sound pressure level (OASPL). The control guarantees a high level of product safety.
-
product
Reverberation Chambers
Over the past several decades, RCs have been enjoying growing popularity as a promising facility for the characterization of wireless devices and for EMC testing. The RC (Reverberation Chamber) measurement method exhibits much competitive superiority over the AC (Anechoic Chamber) method and TEM Cell method, such as low cost, enhanced test repeatability, a more realistic test environment, and easily achieved high-field environment. The application of the RC for performing EMC testing was first proposed by H. A. Mendes in 1968. In the recent IEC 61000-4-21 standard, the importance of EMC testing using RCs as an alternative measurement technique has been recognized.
-
product
Gloveboxes & Gas Purification System
MODEL 440
Provides an inert environment for handling of highly reactive materials.Hermetically sealed chambers prohibitive to moisture and oxygen influx.Vacuum load-lock transfer chamber to avoid contamination.Optional purifier and regeneration systems are available.Three models and many options to suit your requirements.
-
product
6 Slot VPX PCIe Gen2 Chassis
Desert Gecko
The 6 slot conduction cooled chassis can dissipate 120W in a non-moving air environment. The fin design and wall thickness was designed and analyzed with Flowmetrics software and designed for minimum delta T offset in an average thermal load application. The design was then verified in real life enviromental chamber experiments with a sealed chassis using our 3U heat simulator modules. Data available upon request.
-
product
Combined System Controller Software
Designed and manufactured by Crystal Instruments, the Spider-101i controller is a key element of the Sentek Dynamics THV Series AGREE (Department of Defense Advisor Group on Reliability of Electronic Equipment) chambers. These chambers provide combined temperature, humidity, and vibration testing in addition to environmental and reliability testing for a wide variety of aerospace, automotive, medical, commercial, and independent test lab applications. Temperature, humidity, and vibration are controlled with high accuracy and are synchronized to simulate the actual physical environment products experience in the field.
-
product
Compact Environmental Chambers
MicroClimate 3
The MicroClimate 3 is a compact environmental chamber designed to simulate a full range of temperature and/or humidity conditions. The small footprint of the MicroClimate 3 combined with temperature and humidity capabilities make this chamber the number one choice for testing small components and products. Whether you need to perform temperature cycling tests or expose your product to steady state temperature environments, these chambers will maintain precise and accurate temperature/humidity control throughout your test.
-
product
Environmental Test Chambers
Bionic Scientific Technologies
Environmental Test Chambers offer precisely controlled environment required in insect and biological research, electronics production (battery testing and PCB manufacturing) and polymer testing (plastic and rubber testing) etc. Designed ruggedly and fitted with technology advanced instruments, our environmental chambers are available from benchtop cabinets to complex large capacity walk in rooms. At Bionics Scientific, we design and manufacture environmental chambers or climatic test chambers matching with customer required specifications and supply them worldwide at factory price.
-
product
Environmental Testing Equipment
It is to do adaptability and properties test for materials under different environment conditions, which includes salt spray test to determine corrosion resistance and temperature and humidity chamber to do a variety of high-low temperature alternating test.
-
product
Controlled Environment Chamber
STME-CEC
Statclean Technology (S) Pte Ltd
The Controlled Environment Chamber is made from 0.25" clear and white acrylic with internal volume of 9 cu. ft. The equipment is designed to provide a controlled environment for conditioning, research, testing, fabrication and storage.
-
product
OTA Chamber for 5G NR mmWave Signals
ATS1800C
The R&S®ATS1800C CATR based 5G NR mmWave test chamber provides the ideal environment for testing 5G FR2 antennas, modules and devices over the air (OTA) from R&D to conformance. With its small footprint and wide frequency range, the R&S®ATS1800C offers great functionality and test coverage in a very small space. With its flexibility and broad range of extension options, the R&S®ATS1800C offers a solid and future-proof environment for your FR2 testing needs.
-
product
Altitude Chamber
FA Series
Altitude Test Chambers combine temperature and altitude environments with optional humidity for simultaneous environmental testing. An Altitude Chamber allows users to control the test chamber temperature while subjecting the product under test to various levels of altitude 50,000 to 100,000 feet. This combination of elements allows precise simulation of real-life conditions a product might encounter at various altitude levels.
-
product
Environmental Chamber
This Environmental test chamber is designed for all kind of conditions The thermo-glass door is made with quadruple tempered glass, in order to give you a full view of the internal conditions without penalizing your test perfomances.The conditions uniformity during the test is improved through an advanced ventilation air system with whom the chamber is equipped.This machine is automated by a touch screen controller, and gives your test the best conditions with also more control for users. Set your test directly on it and push the start button! In the end, download the results via USB pen drive.Last but not least, besides excellent performances, what other features would you look for in a machine? Easy maintenance for sure! We developed a way to facilitate the cleaning of the condenser and of the air filter. Furthermore, the electrical compartment was placed on the lateral side for an easy access. Is that it? Of corse not, we can also offer a full customization of the chamber, according to any requirement.We are the Environment Makers.
-
product
Automated Wireless Testbeds
octoBox
The STACK-BENCHTOP, STACK-16 and STACK-SNB personal testbeds, emulating real-life wireless environment, range in size from a desktop/benchtop model to refrigerator-sized testbeds on wheels. The compact size of the octoBox enables wireless test and development engineers to perform fast, comprehensive and repeatable testing in their offices rather than inside large isolation chambers or in test houses. OctoBox testbeds support 802.11ac or 4G MIMO devices.
-
product
Ozone Test Chamber
Wewon Environmental Chambers Co, Ltd.
provide an effective solution to the testing of products for resistance against ozone degradation in a controlled environment. These test chambers function as static tensile test chambers as well as Rubber Test Chamber and are often used for studying static tensile deformation of various manufactured goods in the presence of ozone.
-
product
Rapid Decompression Test Chambers
CA-RD(H)
CSZ's rapid decompression test chamber is designed to simulate rapid decompression for testing aircraft avionics. The environmental chamber meets the environmental conditions and test procedures for airborne equipment referenced in the RTCA DO-160 test specification. The DO-160 specification was designed to test sudden pressure changes starting from 8,000 feet to 60,000 feet (536 to 55 Torr) in 15 seconds. An altitude of 8,000 feet (536 Torr) was used for the initial cabin altitude and 60,000 feet was used for the final cabin altitude after decompression. This test specification is used to identify failures of materials inside of the cabin and the reaction to the surrounding environment.
-
product
Shock And Vibration Testing
Innovative Testing Solutions, Inc.
We perform multiple types of vibration testing; Random, Sine, Sine-on Random, Random-on-Random, and Road-Load vibration. Our vibration capabilities range from as low as 2 lbs/force to 4,000 lbs/force. Four of our systems have 2? stroke capacity and we have four chambers designed to perform combined environment testing.
-
product
Highly Accelerated Thermal Shock (HATS2™) Testing
NTS is the exclusive provider of HATS2™testing services in North America. Thermal shock testing has long been the accepted method to check robustness and reliability of plated-through holes and solder joint connections. Historically, thermal shock testing has been performed utilizing either dual chamber air-to-air systems or liquid-to-liquid systems. Both of these methods offer significant disadvantages in cost, time, and the fact that the samples must be transported between the hot and cold environments. Transportation of the samples between the temperature environments makes monitoring the resistance of the samples difficult and inaccurate due to the length and quantity of wires. The infrequent monitoring typically associated with traditional thermal shock methods also makes detection of “glitch” conditions marginal at best.
