Filter Results By:
Products
Applications
Manufacturers
-
product
Digital and Serial I/O
VadaTech’s wide range of ATCA Rear Transition Modules (RTMs) and MicroTCA I/O AMCs make it easier to integrate these standards-based building block systems into your network or application.
-
product
Network Interface
VadaTech offers AMC Network Interface Cards (NICs), FMC networking modules and ATCA rear transition modules (RTMs) with a wide range of connector interfaces to make it easier for you to integrate an embedded computing system into your solution.
-
product
PCIe Gen 3 ATCA Carrier Low-Power Xeon E3
ATC122
The ATC122 is a Carrier Module with an on board x16 PCIe Gen3 slot to accept any standard PCIe edge type module. The module has dual 10GbE connected to the Fabric channels and dual GbE to the base channels. It comes with 32 GB of ECC memory. It also has an option for Trusted Platform Management (TPM).
-
product
PCIe Gen 3 ATCA Carrier With Low-Power Xeon E3
ATC123
The ATC123 is a Carrier Module with an onboard x16 PCIe Gen3 slot (only x8 PCIe is routed to the slot) to accept any standard PCIe edge type module.
-
product
PCIe Gen 3 ATCA Carrier W/ Xeon E3
ATC121
The ATC121 is a PCIe Gen3 Carrier Module. The ATC121 has an on board x16 PCIe Gen3 slot to accept any standard PCIe edge type module. The ATC121 comes with 32GB of ECC memory. It has dual on-board Display Port (DP) to DVI-D converter. The on-board processor provides DP output with dual GbE on the front panel. The ATC121 has an option for the TPM (Trusted Platform Management).
-
product
Rugged Blade Processor W/ Dual Xeon E5
ATC126
The ATC126 is a high performance ATCA processor blade featuring dual 14-core Intel® Xeon® processor (E5-2658 v4, E5-2680 v4, E5-2648L, 2618L, 2620 or 2630 v4), with up to eight banks of 256 GB DDR4 memory with ECC. Versatile connectivity includes two 10/40GbE Fabric Interfaces, dual GbE Base Interfaces, dual front panel GbE egress Ports, front panel dual RS-232 and USB 3.0/2.0 Ports and front panel DVI-I connector.
-
product
Tx/Rx BenchBlade
This ATCA compatible test card offers the flexibility to verify the performance of Advanced TCA fabric and base channels. The set of four Transmit pairs and four Receive pairs allows access to a full channel's eight pairs for logic card characterization. The card includes a HM-ZD male right angle connector segment for access to the Zone 2 connectors of a switch fabric or node card. Edge-launch SMA connectors are utilized for ease of test cable attachment. SMT pads are included on the receive pairs.
-
product
Tx/Rx SignalBlade
This ATCA compatible test card offers the flexibility to verify the performance of Advanced TCA fabric and base channels. The set of four Transmit pairs and four Receive pairs allows access to a full channel's eight pairs for backplane path characterization. The card includes a HM-ZD connector segment for access to the backplane and edge-launch SMA connectors for ease of test cable attachment. DC blocking capacitors are included on the receive pairs as required by Advanced TCA.
-
product
14-Slot Chassis
ATCA CO14G4 DC 14 Slot 14U
The new flagship AdvancedTCA® 14-slot chassis, DC version is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA. Its modular design offers ultimate flexibility to provide a solution tailored for your needs.
-
product
14-Slot Chassis
ATCA CO14G4 AC 14 Slot 15U
The new flagship AdvancedTCA® 14-slot chassis, AC version is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA. Its modular design offers ultimate flexibility to provide a solution tailored for your needs.
-
product
AdvancedTCA Modules
Pixus offers various AdvancedTCA switches, FPGAs, processors, graphics, RTMs, and specialty cards. With our key partnership, Pixus can help you find the right boards at the right price. For simplicity, you can order your full ATCA system and boards through Pixus or we will refer you to the best fit for your application. Our flexible approach leaves the choice to you, and helps ensure you are getting the best performance and value required for your system.
-
product
ATCA 14 Slot System
14 slot custom system leveraging essential features of AdvancedTCA® to meet needs of industrial control application.
-
product
ATCA 1 Slot Doubleheight Chassis
One slot AdvancedTCA® custom system supports a blade with double height to accommodate a custom blade for signal processing of the next generation cellular network application.
-
product
ATCA 6.5 Slot System
6 slot custom system leveraging essential features of AdvancedTCA® to meet needs of industrial control application.
-
product
ATCA CO14G4 AC 14 Slot 15U
The new flagship AdvancedTCA® 14-slot chassis, AC version is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA. Its modular design offers ultimate flexibility to provide a solution tailored for your needs.
-
product
ATCA CO14N AC 14 Slot 14U
The AdvancedTCA® CO14N 14-slot chassis, AC version suits most of the applications in the field. Its proven cooling and power architecture has been aided by a split backplane technology that allows to upgrade the signal backplane to the latest generation without any effort.
-
product
ATCA CO1 AC-DC 1 Slot 1U
AdvancedTCA® CO1
The AdvancedTCA® CO1, 1-slot chassis, DC version is an entry card into the ATCA world. It allows to build dedicated applications based on a single front board or to do bring-up / debugging of a front board in a lab environment.
-
product
ATCA CO2 AC-DC 2 Slot 3U
The AdvancedTCA® CO2, 2-slot chassis, AC-DC version allows to build a dedicated application in a very limited rack space.
-
product
ATCA CO5 AC 5 Slot 5U
The AdvancedTCA® CO5, 5-slot chassis, AC version combines a compact design with high power and high data throughput.
-
product
ATCA CO6 DC 6 Slot 5U
The AdvancedTCA® CO6, 6-slot chassis, DC version is dedicated for applications where available space is limited.
-
product
ATCA CO6 DC 6 Slot 7U
The AdvancedTCA® CO6, 6-slot chassis, DC version with front-to-rear cooling is dedicated for NEBS environment where the space is limited.
-
product
ATCA CO7 AC-DC 7 Slot 6U
The AdvancedTCA® CO7, 7-slot chassis, AC-DC version is designed to bring a very high density and throughput of 7 slots in a very compact 6U space. Its cooling is optimized to ensure the even cooling for all slots.
-
product
ATCA I/O Rear Transition Module (RTM)
ART002
The ART002 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides GbE, 10 GbE, PCIe, USB and Management I/O for the front blade.
-
product
ATCA I/O Rear Transition Module (RTM)
ART001
The ART001 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides GbE, 10 GbE, PCIe and Management I/O for the front blade. The module is designed to mate with any ATCA Carrier. ART001 provides PCIe x8 access via an iPASS connector to the rear. The GbE rear access is provided via six SFP ports and five RJ-45 ports. The module has dual 10 GbE PHY which mates to the host via the zone 3 connector and provides dual SFP+ to the rear.
-
product
ATCA PCIe Rugged Processor With Dual Xeon E5-26xx V4
ATC127
The ATC127 is a high performance ATCA processor blade featuring dual 14-core Intel® Xeon® processor (E5-2658 v4, E5-2680 v4, E5-2648L, 2618L, 2620 or 2630 v4), with eight banks of memory up to 256 GB DDR4 memory. Versatile connectivity includes two PCIe Gen3 x16 Fabric Interfaces, dual GbE Base Interfaces, dual front panel GbE egress Ports, front panel dual RS-232 and USB 3.0/2.0 Ports and front panel DVI-I connector. Onboard mSATA storage is available for local boot.
-
product
ATCA Rear Transition Module
ART132
The ART132 is an I/O expansion ATCA Rear Transition Module(ARTM) that provides PCIe, GbE, InfiniBand, USB andManagement I/O for the front blade. The module is designed tomate with Emerson front blades such as ATCA-7360 andATCA-7365.
-
product
ATCA Rear Transition Module
ART131
The ART131 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides PCIe, 10GbE, and GbE to the front blade.
-
product
ATCA Rear Transition Module
ART108
The ART108 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC108, ATC104, etc. carrier board. The ART108 is a passive RTM that allows for Management RS-232 serial interface and PCIe x4 lanes for expansion. The PCIe x4 is either with Fiber or Copper. The Copper interface is via I-PASS x8 PCIe connector while the Fiber interface is via quad SFP interface.
-
product
ATCA Rear Transition Module
ART104
The ART104 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC104 carrier board. The ART104 is a passive RTM that allows for Management 10/100Mbit Ethernet, Management RS-232 serial interface and PCIe x4 lanes for expansion.
-
product
ATCA Rear Transition Module
ART103
The ART103 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC103 carrier board. The ART103 is a passive RTM that allows for the additional connectivity of two GbE ports, Management 10/100Mbit Ethernet, Management RS-232 serial interface and three PCIe x4 lanes for expansion. One of the PMC J4s (user defined I/O) is routed to the back.
