Filter Results By:
Products
Applications
Manufacturers
-
product
Capillary Rheometer Flowtester
CFT-EX Series
This device evaluates viscosity properties from the relationship to temperature, pressure, and flow velocity, etc., for flowable materials. It demonstrates its power in research and development, production processes, and quality control for various flowable materials such as thermoplastic resins, thermosetting resins, toner, composite materials, ceramics and rubbers.
-
product
Closed-Loop Linear Actuators w/ Stepper Motors, Encoders, and Controllers
A-BAR-E Series
Zaber's A-BAR-E Series products are computer controlled, motorized, ball screw driven linear actuators (electric cylinders) with integrated feedback encoders. They are stand-alone units requiring only a standard 48 V power supply. A built-in encoder allows closed-loop operation and slip/stall recovery features. A manual knob at the end of the unit permits manual control - press and hold to switch between velocity mode and distance mode, turn to move the actuator, and press to stop.
-
product
Closed-Loop Motorized Linear Actuators w/ Stepper Motors, Encoders, Controllers
A-LAR-E Series
Zaber's A-LAR-E Series products are computer controlled, lead screw driven, motorized linear actuators (electric cylinders) with integrated feedback encoders. They are stand-alone units requiring only a standard 48 V power supply. A built-in encoder allows closed-loop operation and slip/stall recovery features. A manual knob at the end of the unit permits manual control - press and hold to switch between velocity mode and distance mode, turn to move the actuator, and press to stop.
-
product
Compact Laser Vibrometer
CLV-2534
The new all-in-one CLV-2534 Compact Laser Vibrometer is made up of a rack-mountable 19?? controller supplying laser power to the sensor head via a fiber optical cable. Both compact and flexible in application, surface vibration in velocity and displacement are measured with high precision and low noise in a bandwidth of 3.2 MHz at 10 m/s maximum velocity.
-
product
Data Logger Software Module
Metra Mess- und Frequenztechnik in Radebeul e.K.
*Data logger and monitor*Records binary or text files which can be processed by other software*Bar graph and numeric display*Level recording if signal exceeds threshold*Adjustable trip delay*Pre- and post-triggering*Recording of vibration acceleration*VM-REC+ also for velocity and displacement*RMS, positive, negative and unsigned peak values, instantaneous value*Up to four signals per window*One VM-REC license can be operated simultaneously up to four times with different settings *External Messengers*Offline measurement
-
product
Digital Anemometer
Anemometer is a high-quality instrument providing highly accurate air velocity measurements in harsh environments via a user-friendly & intuitive interface.
-
product
Digital Circuit Breaker Analyzer
CT-7000 S3
The CT-7000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-7000 S3 is available with 3 (part number 9021-UC) or 6 contact timing channels (part number 9100-UC). The CT-7000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Both contact and motion analysis can be performed on all circuit breaker operations (OPEN, CLOSE, OPEN-CLOSE, CLOSE-OPEN, and OPEN CLOSE-OPEN). The CT-7000 S3’s timing window is selectable between 1 second, 10 seconds, and 20 seconds.
-
product
Digital Circuit Breaker Analyzer
CT-8000 S3
The CT-8000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The CT-8000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.
-
product
Digital Geophone
ZET 7155
Digital geophone ZET 7155 is a vibration sensor with an integrated sensing element enabling conversion of ground oscillations velocity into a proportional electric signal. Vibration speed value is calculated automatically by means of an integrated processor.
-
product
Digital Short-Period Seismometer
ZET 7156-VER.1
Digital short-period seismometer ZET 7156-VER.1 is used for vibration velocity measurements of various structures: elevated (raised and restrictive) and underground (foundations, piles, etc).
-
product
Digital-To-Analog Converter
DAC-200
Advanced Thermal Solutions, Inc.
The DAC-200 is a digital-to-analog converter designed to convert the output of the ATVS family of instruments to 0-5VDC. The device produces an output whereby the voltage is linearly proportional to both the air velocity and temperature for the ATVS product family, including the ATVS-Nxt, ATVS-2020, eATVS-4, eATVS-8, and iQ-200.
-
product
Doppler Velocity Logs
NavQuest is a line of Doppler Velocity Logs manufactured by LinkQuest Inc., a company renown for its innovation, capability and product quality. The NavQuest Doppler Velocity Logs are ideal for precision navigation and positioning of underwater vehicles. With their capability for fast and accurate velocity output, significantly longer range and smaller minimum altitude when compared against similar products, the NavQuest Doppler Velocity Logs are the excellent choices for underwater precision navigation applications.
-
product
Electrodynamic Velocity Pickup
The principle of Reciprocal Pendulum type Pickup is to induce voltage by reciprocal motion of the seismic mass with a coil in the magnetic field being suspended by a diaphragm or coil spring.. Because of its High Sensitivity and Advanced Linearity, it is suitable for detection of malfunction or deterioration of rotational machineries. Due to its structure, mounting should be done carefully for its direction or angle.
-
product
Environmental Measurements
Thermometers, temperature probes air velocity meters are everything you need for controlling and monitoring the quality of the environment, intended both as the working and as the living place.
-
product
Environmental Meters
The environmental meter is used as much indoors as outdoors for measuring humidity, temperature, air velocity and air pressure. Our offer includes: a handheld or tabletop environmental meter, a measurement converter for industrial applications or a meteorological station. Depending on the model, the environmental meter can also automatically count dew point or has the ability to store data for analysis on a computer after measurements have been taken.The environmental meter is very important in industrial processes, warehouses, and of course in the private sector, for example in a house to determine interior and exterior climate and humidity in walls.
-
product
Flow Sensor
These types of devices are going to be able to measure the flow rate, often for a fluid. These sensors are usually a part of a flow meter, which will be able to record the flow rate. Today, many different types of flow sensors are available. It is possible to find air flow sensors as well, which can sense and determine the velocity of air movement.
-
product
Frequency Response Function
FRF
FFT Spectral Analysis. Frequency Response Function (FRF) is a commonly used measurement type of the Dynamic Signal Analyzer. FRF is defined as the ratio of response i.e. acceleration, velocity, or displacement with respect to the excitation force which is the reference.
-
product
Fume Hood Monitor
FHM10
Fume hoods are a primary source or protection in laboratories. Face velocity measurements are often used to gauge the performance of a fume hood’s ability to contain and exhaust hazardous chemicals. By accurately measuring face velocity and alarming on unsafe conditions, TSI’s FHM10 Fume Hood Monitors provide a high level of fume hood safety. And, the FHM10 helps users comply with standards and regulations set forth by OSHA, NFPA, ANSI Z9.5, and SEFA, calling for monitors to be installed on fume hoods.
-
product
Handheld Digital Manometer
477AV
Measures Pressure, Flow and Velocity; ±0.5% Accuracy. The SERIES 477AV Handheld Digital Manometer is now available with pressure, flow, and velocity measurements along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations. Also featured on this unit are adjustable zero and span values for calibrating in the field, as well as a damping feature to compensate for the fluctuating of readings.
-
product
Hand-held meter for humidity / temperature
OMNIPORT 30OMNIPORT 30
The state of the art hand-held for precise measurement of various physical quantities, such as, humidity, temperature, dew point, air velocity, volumetric flow, air pressure. The numerous probes all incorporate high quality sensors developed by E+E and offer a total of 22 measurands.
-
product
High-Precision XY Stage
V-731
Physik Instrumente GmbH & Co. KG
Reference-class XY stage. Travel range 205 mm × 205 mm (8"). Unidirectional repeatability to 0.1 μm. Velocity to 200 mm/s. Incremental encoder with 10 nm resolution.Optionally with stepper motor.
-
product
Laser Surface Velocimeter
LSV-1000
The LSV-1000 represents Polytec?s new, compact velocimeter generation for non-contact length and speed measurement of continuous goods. The sensor provides length and velocity data fast, laser-precise and reliably for control and cut-to-length applications.
-
product
Load Banks
LBD-Series
The Simplex LBD-Series is special form of stationary, resistive, forced air-cooled Load Banks which utilize the air outflow of an engine radiator for cooling of the resistive load elements. This application recovers and uses the volume and velocity of air exiting the radiator. It may appear incongruous that "hot air" from the radiator is used for "cooling". However, "hot" and "cold" are highly relative in this case.
-
product
Logger version 2-D electro-magnetic current meter
INFINITY-EM AEM-USB
Infinity EM is an autonomously deployable EM (electro-magnetic) current meter with a data logger. Due to the principle, the instrument provides high accurate 2-D current measurements in even low scatter fields, where ADVs (Acoustic Doppler Velocimeter) has difficulties. The measurement range is wide from 0 to ± 500 cm s-1. The instrument design is compact (1.0kg in air). Infinity EM allows for current velocity measurements virtually anywhere.
-
product
Long Range, High Resolution Perimeter Surveillance Doppler Radar
Ranger® R5D
The Ranger® R5D is a dual mode, ground surveillance radar designed specifically for the environmental conditions common to the Middle East region. As a dual mode radar, the Ranger R5D uses FMCW modulation and can be operated in either Fast Scan or Doppler mode with a Fast Scan range up to 5km. Low minimum detection velocity (MDV), high resolution, and advanced tracking algorithms result in low false alarm rates.
-
product
Long-Range Perimeter Surveillance Doppler Radar
Ranger® R3D
The Ranger R3D is a dual mode, ground surveillance radar designed to provide efficient, 24/7 persistent surveillance, both within and beyond the fence. Operating in the Ka-band, the Ranger R3D leverages the resolution and accuracy of advanced FMCW technology and the extended range and terrain adaptability of Doppler in a single, compact, and lightweight package. Ruggedized for permanent, all-weather installations and mobile, stop-and-scan operations, its low minimum detection velocity (MDV) detects slow-moving threats such as walkers and crawlers.
-
product
Magnesense Differential Pressure Transmitter
MS
The Series MS Magnesense Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity.
-
product
Measurement
Vibration Meter
The input signal of the Vibration meter software, which is the output signal of the accelerometer, i.e. the vibrational acceleration signal, is filtered by means of one of four possible digital band filters. Then, based on this signal, vibrational velocity and displacement signals are calculated by means of integrating filters. Thus, the software generates three signals which are transferred to the ZETLAB data server virtual channels created by the program and having the word “Acceleration”, “Speed” or “Displacement” in their names, respectively.Signals are averaged for a selected time interval (0.1 s, 1 s, or 10 s), after which the obtained values are displayed in the dialog box elements of the Vibration meter program. It is possible to display a root-mean-square (RMS), average amplitude or peak value.
-
product
Measurement
Torsiograph
Torsiograph is used for measuring the rotation non-uniformity in rotating parts of various mechanisms. Torsiograph generates virtual channels for displacement and displacement velocity. These channels are available for further analysis by ZETLAB programs, e.g. for displaying on the oscillograph.
-
product
Measurement
Encoder
Encoder is used for measuring the relative position (displacement), displacement velocity and direction by means of optical angular or linear displacement sensors (encoders) connected to the ADC input channels.
