Filter Results By:
Products
Applications
Manufacturers
Intelligent Cameras
process sensed images.
-
product
Intelligent Power Monitor
iPM
NAI’s iPM is an Intelligent Power Monitor that provides a precise, instrument grade, digital analysis of input power lines. This advanced, DSP-based unit monitors single-phase, 3-phase 4-wire wye, or 3-phase Delta power lines at various input voltage levels and frequencies.The iPM is equipped with an EIA RS485-compatible serial communications interface that permits additional control functions and readout of diagnostic data, and features a Background Built-in-Test (BIT) that constantly monitors the health of unit hardware and software. This power monitor is designed and qualified to the most stringent performance and environmental requirements, and is ideally suited for rugged defense and industrial applications.
-
product
Compact Pan/Tilt Marine Thermal Camera
FLIR M232
The M232 pan and tilt camera is one of FLIR's smallest and affordable marine thermal cameras. Featuring a resolution of 320 × 240, the M232 improves safety by revealing vessels and obstacles at night. Enjoy 360 degree viewing while underway. Combine the M232 with a Raymarine Axiom MFD and take advantage of FLIR ClearCruise™ intelligent thermal analytics. ClearCruise™ provides audible and visual alerts when "non-water" objects such as boats, obstacles, ornavigation markers—appear in the scene. This enhances boaters’ overall situational awareness, both day and night. Installation Note: ClearCruise™ features are only available on conventional ball-up installations. ClearCruise™ is not available on ball-down installations. Please consult your FLIR dealer for more details.
-
product
Intelligent Thermal Imaging Camera
ThermiBot2
ThermiBot2 AID cameras combine best-in-class thermal imaging technology with advanced video analytics to provide a complete solution for automatic incident detection and data collection. Traffic video analytics from FLIR have proven their effectiveness worldwide along highways and in tunnels, and with the addition of thermal, allow traffic operators to see clearly in total darkness, bad weather, and over a long range.
-
product
Premium Multispectral Marine Cameras with Active Gyro-Stabilization
M364C
Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C and M364C-LR provide an elite level of awareness on the water. Both cameras use multispectral imaging to deliver exclusive FLIR Color Thermal Vision™ (CTV) technology. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance, intelligent object recognition technology, and enhanced gyro-stabilization make the M364C and M364-LR indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.
-
product
Prime sCMOS Cameras
Winner of multiple industry awards, Photometrics Prime is the first intelligent scientific CMOS (sCMOS) camera to incorporate a powerful FPGA-based Embedded Signal Processing™ engine (ESP). ESP enables advanced real-time processing features.
-
product
AI-Powered HD Traffic Sensor
TrafiCam AI
Designed to reliably detect and classify road users, the TrafiCam AI is an intelligent HD visible sensor for traffic monitoring in complex urban environments. Featuring a low-light HD visible camera and AI algorithms built on 25+ years of traffic detection, TrafiCam AI offers detailed vision and data collection for safer, more efficient cities. Capable of tracking multiple objects, the advanced edge-based AI effectively controls intersections and gathers detailed traffic data for better city planning decisions.
-
product
Automated Optical Inspection (AOI)
TR7700 SIII
TR7700 SIII is the newest generation of TRI's AOI solutions, delivering precise multi-phase inspection at full speed. By combining an ultra-fast camera, intelligent auto conveyor, and new GUI, the TR7700 SIII offers a powerful and easy to use AOI solution with fast programming, optimized board loading, production line integration and support for offline programming. TRI's new color algorithm combined with multiple lighting phases increase defect coverage and help deliver highly accurate inspection results with a minimum of false calls.
-
product
Intelligent Thermal Camera with V2X
TrafiSense2 V2X
The TrafiSense2 V2X is a thermal traffic sensor with integrated vehicle-to-everything (V2X) technology. The FLIR V2X-enabled traffic sensor collects data on vehicles, pedestrians, bicyclists based on thermal energy coming off the environment, and communicates this information to V2X-enabled vehicles or infrastructure. This information makes a wide range of V2X applications possible, including left turn assist, public transport priority and traffic signal preemption for emergency vehicles.
-
product
PCIe Color Industrial Camera
CMOSIS CMV4000
2K camera Applications: In-situ optical inspection camera, fast process capturing, e.g. Golf club swings, Intelligent Transportation Systems (ITS), Open road tolling and Traffic monitoring, Industrial Automation, Machine Vision, Facial Recognition, Motion Capture, Automotive crash testing, OCR/ OCV, 3D scanning, Robotic Arms, Material and Life science Microscopy, Ophthalmology and Retinal imaging, Medical Imaging, Flat panel inspection, Dental, Kiosks, Security, Biometrics
-
product
PCIe Mono Industrial Camera
CMOSIS CMV2000
2K camera Applications: In-situ optical inspection camera, fast process capturing, e.g. Golf club swings, Intelligent Transportation Systems (ITS), Open road tolling and Traffic monitoring, Industrial Automation, Machine Vision, Facial Recognition, Motion Capture, Automotive crash testing, OCR/ OCV, 3D scanning, Robotic Arms, Material and Life science Microscopy, Ophthalmology and Retinal imaging, Medical Imaging, Flat panel inspection, Dental, Kiosks, Security, Biometrics
-
product
Pregius Global Shutter CMOS USB3 Camera
Lt-C/M4430
Choose the Lt-C/M4430 USB3 camera for high-resolution and high frame rates. With 4432 x 4436 pixels and a maximum speed of 28 fps, this Sony® Pregius™- based camera captures every detail in a wide variety of vision system applications from aerial imaging and Intelligent Traffic Systems, to robotic inspection solutions, and life sciences. Capture fine detail more quickly with the high-resolution Lt-C/M4430 and get the simple integration of a USB3 interface that is up to 15% faster than competitive USB3 Vision cameras.
-
product
Pregius Global Shutter CMOS USB3 Camera
Lt-C/M5470
With many imaging applications the overall megapixel value of a camera’s sensor is not the most important specification. With a 5472 x 3084 resolution, the Lt-C/M5470 camera is ideal for applications that benefit from a large pixel width. For example, a large pixel width allows unmanned aerial vehicles to capture a wider landscape with each image or an intelligent traffic system to image a greater number of lanes on a roadway. And, with a high dynamic range to go along with its wide field of view, the images from the Lt-C/M5470 clearly distinguish areas of interest.
-
product
Pregius Global Shutter CMOS USB3 Camera
Lt-C/M1610
Using a high frame rate camera with advanced imaging technology is a must for imaging applications like Intelligent Traffic Systems (ITS). The 96 fps frame rate of the Lt-C/M1610 allows high-speed traffic to be imaged in a variety of lighting environments. With a dynamic range of 73 dB and a full well capacity up to 100Ke-, the camera’s 9 µm pixel size is able to capture an impressive amount of detail in low light environments. This means as the sun sets, the Lt-C/M1610 will be able to accurately capture crucial information such as license plate characters.
-
product
Pregius Global Shutter CMOS USB3 Camera
Lt-C/M1630
By developing a camera that takes the high dynamic range of the Sony® Pregius™ Gen 3 sensors and combines the rugged, compact design of the Lt Camera Series, challenging imaging applications such as precision agriculture, Intelligent Trafic Systems (ITS), and Life Sciences can truely benefit. Whether sunlight drops during the day or conditions are a harsh on the factory floor, the Lt-C/M1630 camera can reliably capture clear images in a variety of lighting and operating conditions.
-
product
Pregius Global Shutter CMOS USB3 Board Level Camera
Lt-C/M1610B
Using the Teledyne Lumenera Lt-C/M1610B USB3 board level camera allows engineers to use Sony® Pregius™ Gen3 sensor technology in a reliable and slim form factor. With high frame rates up to 96 fps, a dynamic range of 73 dB, and a full well capacity up to 100Ke, the Lt-C/M1610B is an excellent choice for low light environments. By utilizing the 9 µm pixel size, a significant amount of light can be captured in applications such as intelligent traffic systems that require a fast imaging solution that can reliably capture a clear image in varying lighting conditions.
-
product
Digital VIS-SWIR Camera
OWL 1280
Using a 1280 x 1024 InGaAs sensor from SCD, the OwL 1280 offers visible extension from 0.6µm to 1.7µm to enable high sensitivity imaging. The 10µm x 10µm pixel pitch enables the highest resolution imaging. It will offer less than 28 electrons readout noise (rms) and with a high intra-scene dynamic range of 51dB, this enables simultaneous capture of bright & dark portions of a scene. Available with a 12 bit medium Camera Link digital output, the Owl 1280 will run from 10 to 60Hz. The camera features an on-board Automated Gain Control (AGC) which enables the best contrast image from low to bright light. The camera also has an on-board intelligent 3 point Non Uniform Correction (NUC) providing the highest quality images. As with all Raptor cameras, the Owl 1280 is ultra compact and rugged. The camera sensor temperature is stabilised to 15°C and the camera does not have a fan.
-
product
CSI & DSI Protocol Generator
Envision X84 CSI&DSI
With comprehensive support for MIPI CSI-2v2 and DSI-2 specifications, Teledyne LeCroy’s Envision X84 generator platform provides the industry’s most accurate and reliable generation of MIPI camera and display protocols for fast debug, analysis and problem solving. The Envision X84 exerciser is loaded with innovative features that help uncover elusive protocol errors and is the intelligent choice for any camera and display validation needs. Using the same hardware platform as the Envision X84 C/D-PHY protocol analyzer, the Envision X84 offers the most flexible solution for MIPI Camera and Display validation and debug.
-
product
Police Radar
Stalker DUAL SL
Industry Leading Performance • Automatic Same Direction Tracking • Intelligent Fastest Speed Tracking • Available with 1 or 2 Antennas • 3 Window Multicolored LED Display • Read-Thru Lock • Cordless Infrared Remote • Compensated True Audio Doppler • Digital Antenna Communications • Narrow Beam Width • Waterproof Ka Band Antenna • Small Detachable Display Unit • Software Upgradeable • Interfaces with Cameras & Computers • 3 Year Full Warranty
-
product
3D AOI Series
MV-9
- Exclusive 15MP / 25MP CoaXPress Camera System- OMNI-VISION® 3D Digital Tri-Frequency Moiré Technology- Leading-Edge 12 Projection Blue DLP Technology- Precision Compound Telecentric Camera Lens- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Programmable Z-Axis Multi-Focus System- INTELLI-PRO® Automatic Programming Software- Multi-Functional AOI-SPI Fusion Technology- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
3D SPI Series
MS-11e
- Exclusive15MP / 25MP CoaXPress Camera System- Dual Projection Shadow Free Moiré Technology- Precision Compound Telecentric Camera Lens- Automated Z-Height Calibration System- Automated PCB Under Board Support System- Precision PCB Warpage Compensation- Closed Loop Communication With Screen Printer- Absolute Repeatability and Reproducibility- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
3D AOI Series
MV-7 OMNI
- Exclusive 15MP CoaXPress Camera System- OMNI-VISION® 3D Digital Tri-Frequency Moiré Technology- Leading-Edge 12 Projection Blue DLP Technology- Precision Compound Telecentric Camera Lens- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Programmable Z-Axis Multi-Focus System- INTELLI-PRO® Automatic Programming Software- Multi-Functional AOI-SPI Fusion Technology- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
3D SPI Series
MS-15
- Exclusive 15MP / 25MP CoaXPress Camera System- Dual Projection Shadow Free Moiré Technology- Precision Compound Telecentric Camera Lens- Automated Z-Height Calibration System- Automated PCB Under Board Support System- Precision PCB Warpage Compensation- Closed Loop Communication With Screen Printer- Absolute Repeatability and Reproducibility- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
3D AOI Series
MV-6 OMNI
- Exclusive 15MP / 25MP CoaXPress Camera System- OMNI-VISION® 3D Digital Tri-Frequency Moiré Technology- Leading-Edge 12 Projection Blue DLP Technology- Precision Compound Telecentric Camera Lens- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Programmable Z-Axis Multi-Focus System- INTELLI-PRO® Automatic Programming Software- Multi-Functional AOI-SPI Fusion Technology- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
Desktop 3D AOI Series
MV-3 OMNI
- Exclusive 15MP / 25MP CoaXPress Camera System- OMNI-VISION® 3D Digital Tri-Frequency Moiré Technology- Leading-Edge 12 Projection Blue DLP Technology- Precision Compound Telecentric Camera Lens- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Programmable Z-Axis Multi-Focus System- INTELLI-PRO® Automatic Programming Software- Multi-Functional AOI-SPI Fusion Technology- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
Multispectral Fixed Camera for Early Fire Detection
FH-Series R
The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
-
product
Fiber Extender Kit
L-1SDI-FE-3G-TX/RX
The L-1SDI-FE-3G-TX/RX is a SD/HD/3G-SDI over fiber transmitter and receiver extender kit. This unit provides optical transmission of one SD/HD/3G-SDI signal with embedded audio signal and has reversed RS485 data channel for camera control. L-1SDI-FE-3G-TX/RX kit can be used in HD video conference, as well as HD video monitoring, intelligent transportation system and public security system.
-
product
Manual Vision Measuring Machine
Sinowon Innovation Metrology Manufacture Ltd.
High precision marble base and pillar ensures the high stability of vision measuring system; High precision toothless rod and fast moving locking device ensures repeatability error is less than 2um;High precise working stage with 0.5um optical linear scales ensures the accuracy is less than 2.5+L/200um;High definitive detent zoom lens and high resolution color camera ensures clear image without distortion;With programmable surface 4-ring 8-division LED Cold Illumination and contour LED telecentric illumination and built-in intelligent light adjustment, it can automatic control the brightness in the 4-ring 8-division.
-
product
EST Thermal Cameras
Elevated Skin Temperature Thermal Cameras are designed for monitoring temperature changes of human body. As COVID-19 spreads across globe, human devote to find a way to retard or stop virus spread. Even though Elevated Skin Temperature Thermal Cameras cannot directly diagnose COVID-19, it still can control virus spread through monitoring the temperature changes of human body. Combined with mounting bracket, intelligent alarm system and professional analysis software, it is widely used in crowed public areas such as Airport, Shopping Mall, Railways, etc.
-
product
Pyrometer with Spotfinder
thermoMETER TIM 8
The thermoMETER TIM 8 combines the advantages of a robust pyrometer with a thermal imaging camera. Due to its extremely compact size, it can also be integrated into machines and production lines. The spotfinder function enables precise temperature measurements with automatic sensor adjustment. In addition, remote focusing of the lens is possible via a motorized focus. This intelligent spotfinder pyrometer is used in automation, machine building and plant monitoring.
-
product
NTCIP Integration
NTCIP is a standard protocol for allowing traffic management systems to talk to intelligent transportations systems field devices such as: dynamic message signs, CCTV cameras, vehicle detection sensors, traffic signals, Road weather information stations (RWIS), along with many other types for roadway devices.
